Minolta PI4700E Bedienungsanleitung PDF herunterladen (Seite 34)

Di470

It is understandable that the customer does not want to convert thousands of existing documents, but due to the vast number of different printers currently

available on the market today, it is not possible to exactly emulate all printer manufacturers' algorithms. The only other option is to pick one printer model,

format these documents that need a consistent look for that printer, and use only that particular printer to print these documents. If there are any further

questions, please feel free to contact the National Systems Solutions Group at 1-800-825-5664.

* Trademark ownership information

Solution ID

Solution Usage

TAUS0656534EN*

Description

Jamming out of the first tray.

Solution

CAUSE: Contaminated roller bushings and/or sluggish Vertical Transport Motor (M6).

SOLUTION: Clean bushings and/or replace M6 (p/n 9314-1000-41).

Solution ID Solution Usage

TAUS0634060EN*

Description

List of equipment that is no longer being supported.

Solution

Please see attached Product & Technical Support Bulletins 1792 and 2443 andMarketing Bulletin#07-GB-016.

Note : To view a PDF, Adobe Reader® must be installed. Adobe Reader® can be downloaded for free from the Adobe® web site at:

http://www.adobe.com/products/acrobat/readstep2.html

Solution ID Solution Usage

TAUS0635991EN*

Description

When connected to a Jamex™ model 6557 coin-op, the document feeder and duplexing unitare non-functional even when the coin-op is "bypassed".

Solution

CAUSE:Coin-op limitation.

SOLUTION: Most coin-op devices do not provide the ability to duplex and multi-feed. Please try changing the vendor mode to "Card."

Note : All service issues related to the installation and use of Jamex™ vending products are handled directly by Jamex™. The support phone number is

800-289-6550.

Solution ID Solution Usage

TAUS0655991EN*

Description

Why does pagination change when printing any document using the Konica Minolta print driver?

Solution

Pagination differences between different manufacturers print drivers:

This situation is not uncommon in the printing world. Commonly, documents will be formatted differently when printed to printers made by different

manufacturers. There are many reasons for this. Due to physical differences between printers, as well as copyright laws, different manufacturers will use

different programs for their drivers. It is the driver that does the majority of the formatting for the image to be placed on the page. Different drivers will use

different algorithms when imaging spacing and font metrics. Often times, this results in a slightly different look or format for a document when printed to two

different printers.

There is also potential differences within the image areas of the main bodies of the two printers. The print controller takes the image area into account when

laying out the image on the paper. Different image areas can determine different layouts. These factors can result in lines of text being moved on the paper. If

lines are moved enough, or lie close enough to the threshold of the image area, text and page breaks that are rendered in a certain position on one printer

may be rendered in a different position on another.

This scenario will occur across the board for printer manufacturers. A Lexmark is different from an Epson which is different than an HP, etc. Obviously, the

output from certain printers will match up closer to some printers than others. The effect of this behavior can be reduced somewhat by printing with a common

standard PDL such as PostScript. Alternatively, the customer can print with a common driver to both printers. In other words, one can print to the HP using the

Konica Minoltadriver or vice versa. In this way, at least the driver-generated output would be the same going to both machines. While the output still may not

be exactly the same, the effect of printing to two different printers can be lessened. There may even be different output within the same printer manufacturer

(i.e., Konica IP302 print controller is good, but the IP304 print controller is not; Lexmark Optra K1220 is good, but the Optra T614 is not).

The analogy that is often used when explaining this to customers involves motor vehicles. A Ford and Dodge are essentially the same in terms of the fact that

they are cars that serve as a means of transportation, just as two printers are output devices. However, while the end result of driving two different cars is

essentially the same, there may be certain differences with regard to cornering and acceleration that give each car a distinct feel. This is essentially what is

happening between the two printers.

It is understandable that the customer does not want to convert thousands of existing documents, but due to the vast number of different printers currently

available on the market today, it is not possible to exactly emulate all printer manufacturers' algorithms. The only other option is to pick one printer model,