Minolta Magicolor 2200 Betriebsanweisung PDF herunterladen (Seite 148)

Requirements148

water pipes, refrigerators, and any strong electromagnetic field (such as that created

by an air conditioner), open flames, or items that can easily burn, or items that produce

excessive vibration.

If the printer is located in a cold room that is rapidly heated, or if the printer is moved

from a cold place to a warm, humid place, condensation may occur within the printer,

degrading print quality. If this occurs, allow the printer to adapt to the environment

for about one hour before use.

„

Away from water.

If using a humidifier or water vaporizer in the room with the printer, use only purified

or distilled water. Impurities in the water may be released into the air, where they can

accumulate inside the printer and cause degraded printer output.

„

At an altitude of 0–8202' (0–2500 m).

„

Near your computer—6.5' (2 m) or less for an IEEE 1284 bidirectional parallel con-

nection; cables for other connections may be longer.

„

Close to an easily accessible grounded power supply on an exclusively dedicated

power outlet.

WARNING!

Do not connect the groundwire to gas or water pipes or grounding for telephones.

„

Not connected to the same electrical outlet as noise-generating equipment. If the

printer is connected to the same circuit used by other high-current machines, such as a

copier or air conditioner, or to an electrically noisy machine, low voltage or noise may

cause overheating, computing errors resulting in data loss, and improper performance.

„

In a well-ventilated area, but away from wind.

„

With enough space to allow adequate ventilation and easy servicing.

Attention

Obstructing the ventilation grilles could present a fire hazard.

1 2 ... 143 144 145 146 147 148 149 150 151 152 153 ... 167 168

Keine Kommentare

Minolta Magicolor 2200 Betriebsanweisung Seite 148