Emulations, Fonts, and Other Software 117
Downloading Disk Fonts via CrownAdmin
We recommend that you use CrownAdmin to download PostScript fonts. Refer to the
CrownAdmin online help for instructions.
Downloading Disk Fonts via a Parallel Interface
1
Turn on the printer, and wait for
IDLE
to display in the message window.
2
Insert the font disk or CD-ROM in your PC, and change to that drive (for example, if
you’re using the A drive, type
a:
↵
).
3
Send the fonts to the printer’s hard disk. Type
copy
filename
↵
where filename is the name of the installation file
4
When the downloading is complete, reboot the printer.
Downloading Fonts via an Ethernet Interface
5"
Before you begin this procedure, your printer and PC (or UNIX workstation) must be
connected to an Ethernet network running TCP/IP and have valid IP addresses.
1
If your PC is running Windows, change to DOS.
2
Insert the fonts disk or CD-ROM in your PC, and change to that drive (for example,
if you’re using the A drive, type
a:
↵
).
3
If you want to download the fonts from a UNIX workstation, copy the installation
file from the fonts disk to a temporary directory on your UNIX workstation.
4
Turn on the printer, and wait for
IDLE
to appear in the message window.
5
Open an ftp session at your PC or workstation by typing one of the following com-
mands:
ftp
printername
↵
(for example, ftp pctdev6
↵
)
ftp
ipaddress
↵
(for example, ftp 161.33.130.45
↵
)
6
When prompted for a user name and password, press Enter for both.
An ftp
>
prompt displays.
Kommentare zu diesen Handbüchern