Minolta DIMAGE VIEWER 2.1 Bedienerhandbuch PDF herunterladen (Seite 23)

To eject a card, open the card-slot door (1), and press and release the card-eject lever to extend it (2).

Press the card-eject lever to eject the card (3). The card can now be pulled out. Take care when

removing the card as it becomes hot with use. The card-eject lever should remain inside the camera

body. If it extends, push it into the camera.

Insert a new memory card and close the card-slot door (4).

If the “Unable to use card. Format?” message appears, the card should be formatted with the camera.

Using the left/right keys of the controller, select “Yes” to format the card. “No” closes the window

without formatting the card; remove the unformatted card from the camera. Formatting erases all data

on the memory card permanently. Depending on the memory card, formatting can take several

minutes. A memory card can also be formatted in section 1 of the playback menu (p. 116). A memory

card used in another camera may have to be formatted before being used.

If the card-error message appears, press the central button of the controller to close the window;

check the Konica Minolta web site for the latest compatibility information:

North America: http://www.konicaminolta.us/

Europe: http://www.konicaminoltasupport.com

2 3 4

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 171 172

Keine Kommentare

Minolta DIMAGE VIEWER 2.1 Bedienerhandbuch Seite 23