Minolta Magicolor 2200 Installationsanleitung Seite 19

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 34
  • Inhaltsverzeichnis
  • FEHLERBEHEBUNG
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 18
Configuration Menu Overview
15
English
Sample Page
This menu item initiates the printing of a sample page that can be used to check print quality.
Engine
The following menus allow you to configure the hardware control settings of your printer.
Error Recovery
When the Error Recovery feature is On, the printer will automatically reprint pages that are halted
due to media jams or other errors.
Energy Saver
From this menu item you can set the time interval that the printer must remain inactive before it
will switch to a state of reduced power consumption.
Print Density
This menu item allows you to adjust the amount of toner applied during the printing process.
Menu
Sample Page
Purpose
Prints a sample page.
Choices Yes
—Prints a sample page.
No
—Doesn’t print a sample page.
Default
Yes
Menu
Engine/Error Recovery
Purpose
Enables or disables error recovery.
Choices On
—Reprints a print job from the page on which the jam or error occurred.
Off
—Don’t reprint a print job when a jam or error occurs.
Default
On
Menu
Engine/Energy Saver
Purpose
Sets the length of inactivity before the printer changes to a low-power state (the engine
remains on, but the fuser turns off).
Choices 15 minutes, 30 minutes, 1 hour, 2 hours, 3 hours
—Idle time before activation of low-power
state.
Off
—Use normal power all the time.
Default
30 minutes
Notes
After the chosen time expires (for example, 30 minutes), the printer enters a low-power mode.
The printer remains in low-power mode until a print job is received or until the printer is manu-
ally switched from offline to online. After receiving a signal to print or to go on line, the printer
warms up and returns to normal power.
Menu
Engine/Print Density [Yellow, Magenta, Cyan, and Black]
Purpose
Adjusts toner (color) density.
Choices
-1.6%, -0.8%, 0%, +0.8%, +1.6% (lowest to highest density)
Default
0%
Seitenansicht 18
1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 33 34

Kommentare zu diesen Handbüchern

Keine Kommentare