Minolta DIMAGE VIEWER 2.1 Bedienerhandbuch PDF herunterladen (Seite 43)

ATTACHING AN ACCESSORY FLASH

To extend the versatility of the camera, an accessory flash unit (sold separately) can be

used. Always remove the accessory flash when the camera is not in use, and replace the

accessory-shoe cap to protect the contacts.

Slide the accessory-shoe cap off as shown. Mount

the flash unit on the accessory shoe by sliding it

forward until it stops.

The following Konica Minolta flash units are compatible with this camera:

Maxxum/Program Flash 2500(D)

Maxxum/Program Flash 3600HS(D)

Maxxum/Program Flash 5600HS(D)

System Accessories

When using an accessory flash, the camera uses pre-flash TTL metering to determine

exposure.

The flash modes available when using an optional flash unit varies with

the exposure mode. Autoflash can only be used with auto, program (P),

and Digital Subject Programs. Fill-flash and slow sync. can be used with

all exposure modes except movie. Red-eye reduction cannot be used.

Because of the large distance between the flash tube and optical axis,

red eye is rarely caused by accessory flash units.

Off-camera flash cables and accessories are not compatible with this camera. The Close-

up Diffuser CD-1000 can be used, but AF speed is reduced.

Flash Notes

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 123 124

Keine Kommentare

Minolta DIMAGE VIEWER 2.1 Bedienerhandbuch Seite 43